The development prospects of the double-end grinding machine industry is very good, because in the use of the benefits for the enterprise more, so by the customers of all ages, in order to let you know more, then we will tell about the Rushan double-end grinding machine matters needing attention.

Nowadays, there are still many people who do not know some basic information about Rushan double-end grinder, so as a manufacturer, it is necessary for us to explain briefly. In fact, Rushan double-end grinder should wear goggles when cutting workpieces. Of course, it is also recommended that you do not wear gloves to operate the double-ended grinder. Please do not touch the double-head grinder grinding wheel with your hands when the machine is running. Please turn off all power in front of the machine. In addition, add lubricating oil in time, it is generally recommended to add it once a day when going to work. Cutting fluid should be sufficient. If the amount of cutting fluid is insufficient, the grinding temperature will rise, which will seriously increase the surface roughness of the workpiece, resulting in a decrease in surface quality. Feeding should be continuous and uniform. When grinding and feeding, the workpiece needs to be continuously fed one after another. It is necessary to ensure that each workpiece passes through the grinding area of the grinding wheel for the same time, so as to ensure a better size. Or Rushan double-end grinder everyone needs to know the accuracy of workpiece measurement when working. The workpiece needs to be measured after each grinding, and the measurement results will be used as the basis for the next grinding compensation. In particular, the precision of the workpiece measurement is directly related to the amount of compensation for the second grinding, and a little carelessness will lead to the scrap of the workpiece.

The accuracy of compensation needs to be paid attention to when operating the Rushan double-end grinder. When compensating for the rotating handle, be sure to feel it with your hands. If there is resistance to turning the handle, it is effective. If there is no resistance, the handle is moving in the air. Only the gap between the teeth of the transmission teeth is moved, and the compensation is invalid. Pay attention to the operation experience. In addition, the instability of each grinding amount when the machine is cold. When the machine tool is cold, the axial clearance of the spindle, the gap between the teeth of the compensation transmission gear, the limitation of the pressure of the spindle moving cylinder, the uneven grinding resistance and other factors make the grinding amount large. The grinding wheel is different from the actual compensation amount. It will be a lot of work. To solve this problem, of course, there are two ways at this time. One is to grind the grinding wheel when starting up in the morning, roughly grind the workpiece first, and then carry out fine grinding after the temperature of Rushan double-end grinding machine rises and stabilizes. Another method is to accurately measure the workpiece once during each grinding, master the difference between each grinding amount and the actual compensation amount, summarize its rules, provide empirical basis for Rushan double-end grinding machine, and appropriately correct the compensation amount.

The content of the above article is a small series for everyone to introduce the matters needing attention on Rushan double-end grinding machine. If you didn't know before, you can come and have a look now. The next issue will also tell you about the knowledge points related to it. Remember to watch.