Connecting Rod Workpiece Belt
The connecting rod workpiece belt is mainly applied to the automatic transmission between the upper working process and the lower working process of the connecting rod production line,
Model:
Name:
Classification:
Conveyor Belts for Connecting Rods
Contact Email:
Product Introduction
The connecting rod workpiece belt is mainly applied to the automatic transmission between the upper working process and the lower working process of the connecting rod production line,
The working principle of the connecting rod workpiece belt is as follows: The circular motion of the motor is converted into linear motion by using a deceleration motor with an eccentric wheel and a mechanical device, and drive the V-shaped trough of the conveyor belt to do reciprocating linear motion. The small end of the connecting rod is placed in the peristaltic trough of the connecting rod workpiece belt with the big end of the connecting rod supported by round supporting rods at two sides, which makes the connecting rod in an upright position with forward inclination. When the V-shaped trough moves forward, the friction force of the small end of the connecting rod is greater than the friction force of the supporting rod due to the action of gravity, the connecting rod moves forward. When the V-shaped trough moves backward, the friction force of the big end is greater than the friction force of the small end of the connecting rod, the connecting rod is kept still at this moment. When the V-shaped trough moves forward again, the connecting rod moves forward again by one step. The connecting rod moves forward in a peristaltic and stepping manner, so that the connecting rod is automatically conveyed according to the working target.
Features and advantages
1. A lifting and lowering mechanism is installed on the connecting rod workpiece belt to adjust the height of the V-shaped trough and change the inclination angle of the conveyed connecting rod, which can meet the conveying requirements of connecting rods with different specifications. Height adjustment range: 60mm (can also be specially designed as required).
2. The width of the support rod of the connecting rod workpiece belt is adjustable. The width adjustment range is 30 mm (It can also be specially designed according to requirements) so as to be suitable for connecting rods with different sizes.
3. The height of the supporting rod at the big end of the connecting rod of the connecting rod workpiece belt is 800 mm above the ground. The height can be designed and adjusted according to requirements. The lower part is provided with an adjusting foot and a fixing bracket for fine adjustment.
4. The connecting rod workpiece belt is driven by an integrated deceleration motor with a power of 0.25 KW.
5. The standard reciprocating stroke of the connecting rod workpiece belt is 12mm, which can also be designed according to requirements to meet various working rhythm requirements.
6. The connecting rod workpiece belt is provided with gantry supports. The maximum spacing between the gantry support is 1.6 meters.
7, The transmission mechanism of the connecting rod workpiece belt is provided with a safety protection net cover,
8. The lower part of the connecting rod workpiece belt is equipped with a liquid collecting tray to collect the lubricating oil or cleaning liquid dripping from the connecting rod. The liquid collecting tray is made of 1mm thick spray-painted plate.
9. A transverse blocking device is installed at the discharge port at the end of the connecting rod workpiece belt to prevent the connecting rod from falling.
Key words:
Contact Us
Address: No. 28, Chuanye 1st Road, Rushan City, Shandong Province
Previous Page
Previous Page
Next Page
Product Message
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Other Products
We decide the quality of the pros and cons · Quality determines the user's choice
Automatic Double Disc Grinding Machine
SX150-12YL
The full-automatic double disc grinding machine is mainly used for the production line of engine connecting rods to meet the requirements of diesel engine connecting rod processing technology and gasoline engine connecting rod processing technology.
CNC Double Disc Grinding Machine
SX150-9W
The CNC double disc grinding machine can be used for high-precision grinding of two end surfaces of large-size parts such as a connecting rod of a diesel engine, a carbon ceramic plate, a carbon ceramic brake disc, a cylinder cover, a valve block, a square cylinder cover and the like, adopts reciprocating motion and plunge grinding, and mainly comprises a four-axis numerical control system;
Precision Double Disc Grinding Machine
SX100-5W
The precision double disc grinding machine is suitable for high-precision processing of two end faces of parts with various shapes and different materials, is especially suitable for workpieces such as air conditioning compressor cylinders, silicon blocks, monocrystalline silicon wafers, cross shafts, valve blocks and the like, and can grind workpieces with large allowance and high precision requirements to finish the products at one time;
Double Disc Grinding Machine for Carbon Ceramic Brake Disc
SX100D-5W
The carbon ceramic brake disc is made of special materials to solve the characteristics of wear resistance and weight reduction, but it also brings the problem of difficult processing.
LGM50Y
By switching different fixtures, this double disc grinding machine can grind motorcycle connecting rods, mobile phone edge strips, mobile phone frames, bearings, pistons, piston pins, wool scissors blades, crankshaft bush covers, cams, sliders and many other products.
Horizontal Shaft Double Disc Grinding Machine
M7650B
The horizontal spindle double disc grinding machine is widely used because of its strong versatility, simple fixture, easy and fast to switch varieties, high grinding efficiency, strong rigidity, good stability, small power, low grinding cost and low price.
MY7650B
The double disc grinding machine is suitable for grinding parts of various shapes and different materials on the upper and lower surfaces, especially parts with high requirements for verticality, flatness and parallelism, such as bearings, pistons, stamping parts, cam pieces, piston pins, rollers, ceramic parts, etc.
Through type Double Disc Grinding Machine
M7675B
The through-type double disc grinding machine can be used for powerful grinding, is an ideal double disc grinding machine for grinding multi-specification products by a single machine, and is mainly used for grinding round or square and rectangular large-specification parts such as bearings, bicycle disc brakes, gear rings, notebook aluminum plates, compressor valve plates, robot gears, blades, air compressor valve plates, aluminum plates and the like.
Contact Us
Address:No.28, Chuangye 1st Road, Rushan, Weihai, Shandong Province, China
Focus on us
Mobile website
WeChat customer service
©2023 Rushan Shuangxing Machine Tool Manufacturing Co., Ltd. Label 300.cn Business License city substation