12-13

Rushan City Shuangxing Machine Tool Manufacturing Co., Ltd. website will be launched soon. Please look forward to it!

Rushan Shuangxing Machine Tool Manufacturing Co., Ltd. is located in Rushan, a beautiful seaside city. It is a high-tech enterprise. It has a group of engineering and technical personnel who have been engaged in the design and manufacture of double-end grinders for a long time, and has mastered the development trend of advanced grinder manufacturing technology at home and abroad. It has formed a technical team with considerable influence at home and abroad, has a number of independent intellectual property rights, and won many scientific and technological innovation awards. It has successively provided supporting services for Shanghai GM, Weichai, Yuchai, North GM, Luotuo, Beinei, Gree Electric, BYD, etc. Products are widely used in mobile phones, glass, ceramics, connecting rods, compressor cylinders, oil pump blades, bicycle disc brakes,

12-13

Understand the classification and application of cylinder

The basic structure of the cylinder The so-called pneumatic actuator is the element that uses compressed air as the power to drive the mechanism for linear, swing and rotary motion. Cylinder classification, structure and other basic knowledge summary take the commonly used basic cylinder as an example to see what is inside. Cylinder classification, structure and other foundation knowledge are summarized. Then the problem comes. I wonder if you can see whether it is a single-acting cylinder or a double-acting cylinder after looking at the above picture?

12-13

The Method of Correctly Using Double End Grinding Machine

Double end face grinding machine is a kind of high efficiency plane processing machine tool, in a processing process at the same time grinding out two parallel end face, according to the structure can be divided into horizontal and vertical two kinds, according to the feeding mode, and can be divided into through type, rotary type, reciprocating. Due to the high precision and high consumption efficiency of the grinding products, they are widely used in many industries such as automobile and friction, bearings, and magnetic materials.

12-13

Application summary of knowledge about cylinder

The selection of the type of cylinder The selection of the type of cylinder is selected correctly according to the work request and conditions. When the plea cylinder arrives at the end of the stroke without impact phenomenon and impact noise, the buffer cylinder should be selected; the plea is light in weight, and the light cylinder should be selected; the plea is narrow in installation space and short in stroke, and a thin cylinder is optional; there is a lateral load, and a cylinder with a guide rod is optional.

12-13

Precautions for the use of double-end grinders

Double-end grinding machine series between the grinding wheel and the shaft can be fastened with screws or adhesive. The circular grinding wheel in the device should pay attention to the following points: the matching clearance between the inner hole of the grinding wheel of the double-end grinding machine and the journal of the connecting shaft should not be too large or too small. Too small, easy to crack the grinding wheel; too large, so that the grinding wheel focus and cause vibration.

12-13

What are the requirements for using a connecting rod double-end grinder

Due to the high precision and high consumption efficiency of the products ground by the connecting rod double-end grinding machine, it is widely used in many industries such as automobile and friction, bearings, and magnetic materials. Behind the widespread application, it also puts forward new technical requirements for its inverter. The frequency converter of the connecting rod double-end grinder is requested to use sagittal frequency converter for low frequency torque election, which can produce 150% rated torque at low frequency (1~10Hz).

12-13

Why can the cylinder frequently reciprocate

Pneumatic actuator that converts the pressure energy of compressed gas into mechanical energy in pneumatic transmission. There are two types of cylinders for reciprocating linear motion and for reciprocating oscillation. Cylinders for reciprocating linear motion can be divided into four types: single-acting, double-acting, diaphragm-type and impact cylinders. Single-acting cylinder: There is a piston rod at only one end, and air is supplied from one side of the piston to generate air pressure. The air pressure pushes the piston to generate thrust and extends, and returns by spring or self-weight.

12-13

What are the requirements for the use of connecting rod double-end grinders

Due to the high precision and high consumption efficiency of the products ground by the connecting rod double-end grinding machine, it is widely used in many industries such as automobile and friction, bearings, and magnetic materials. Behind the widespread application, it also puts forward new technical requirements for its inverter. Request connecting rod double end face grinder inverter low frequency torque election with sagittal frequency converter.

12-13

Do ordinary cylinders have their own air buffers?

Generally speaking, today's rod-less gas rods generally have their own gas buffer of about 10mm. This is to prevent the inertial movement that cannot be prevented when the piston moves back and forth due to the thrust of the air pressure when the cylinder stops working, and cannot be stopped in time, and then the end cover is maintained through the air buffer to prevent the end cover from being directly and quickly collided by the piston.

12-13

How much do you know about cylinders?

The cylinder is used every day. When it comes to selection and application, everyone must be very familiar with it, and even can tell a lot about it. To be sure, there are some learning is neglected by myself. Today, I have specially sorted out some. Maybe you already know some, but it's no harm to learn something new from the past. Parallel cylinders should pay attention to the fact that the distance between the two parallel cylinders must be greater than 40mm, otherwise the magnetic switches of the two cylinders will interfere with each other, resulting in misoperation.

12-13

Polishing Process of Plane Polishing Machine

The polishing process of the plane polishing machine uses the relative movement of free granular abrasive on the processed surface of the workpiece and the base surface of the grinding disc to make the surface of the workpiece become very high flatness and smoothness. The workpiece does not need strong clamps, vacuum and magnets to fix, but is naturally placed on the grinding disc, which is basically suitable for processing workpieces of any metal and non-metal materials. The mirror grinding machine does not have mandatory clamping and rigid grinding of general grinding machines, it reduces the secondary deformation caused by impact and heat generation, and is more conducive to high-precision and high-finish processing. Even an inexperienced operator can easily use a mirror grinder to obtain a flatness of 0.2um and a roughness of Ra0.02um.

12-13

Specific introduction of the working principle of the end face grinder

Face grinding is a widely used grinding process. This grinding process can grind various metal and non-metal workpieces through the cooperation of different fixtures, and this end grinding machine is very suitable for semi-finishing and finishing. The face grinding process is especially widely used in the automotive industry.